Water burns and we don't mean when it's hot. If new discoveries are to be believed, water can be turned into fire.
Based on new discoveries in the US, believe it or not, water can be used to weld metals, cut through inch thick steel, and even fuel your car.
How is this possible you ask? By using an experimental system that turns even ordinary tap water into a new type of gas called Brown's Gas. Brown's gas is simply water broken down into its constituent gas parts, hydrogen and oxygen. When these two gases are combined at a certain pressure and lighted, it creates an implosion of tremendous of heat and energy.
California inventor and Professor Yul Brown has developed a system (and has since patented it) that will convert plain tap water to a stoichiometric mixture of hydrogen and oxygen, another state of water besides ice, water, or steam, and he has aptly called it as Brown's Gas.
According to the professor, Brown's gas can be used for many things. It can be used for desalinating water, welding metals together, creating a vacuum to pump up water, sublimate hard metals such as tungsten, and cut through thick steel.
Brown's gas is efficient, safe, clean and inexpensive. Already there are some Brown's Gas Welders available, based on his designs. Though these early models are from perfected and currently cost more than regular welders, the long-term savings from their use offset the cost of acquisition. This means welders no longer need dangerous oxy-acetylene tanks. Water and electricity and Professor Brown's system will suffice.
Another, far more significant use, of Brown's gas is in the area of automotive fuel efficiency.
Brown's Gas is a critical component of a newly introduced system that significantly reduces gas consumption in motor vehicles, Hydro Assist Fuel Cell or HAFC.
HAFC technology's effectiveness is based on its ability to extract a hydrogen-oxygen mixture - yes, the aforementioned Brown's gas - from water by ionization using the car's electricity generated from the motor. The Brown's gas is then added to the fuel before it is burned in the engine. This adds explosiveness to the mixture making the fuel burn more easily and more powerfully.
The Brown's gas extracted from water in the HAFC enriches the gasoline fuel mixture. Enriched fuel gives the same if not greater amount of burn with less fuel thus improving you vehicles gas mileage.
Some studies have shown that the HAFC system can improve gas mileage in internal combustion engines a minimum of 50%. This is a dramatic increase in mileage and fuel economy, though it is expected that savings will vary from vehicle to vehicle, and depending on the uses the vehicles sees. The great thing about HAFC System is that it will work on all existing gasoline-burning cars. It is also compatible with other emerging technologies such as Pre Ignition Catalytic Converter technology or PICC, which should be available to you soon.
These are currently some of the promising uses for Brown's Gas, and as shown by the Brown's Gas Welding machines and HAFC technology in cars, it is a discovery that will greatly benefit many industries particularly the construction and the auto industry. One thing is for certain, once the use of HAFC goes mainstream, it will greatly lessen America's reliance on foreign oil - one of the great victories for Brown's Gas.
Based on new discoveries in the US, believe it or not, water can be used to weld metals, cut through inch thick steel, and even fuel your car.
How is this possible you ask? By using an experimental system that turns even ordinary tap water into a new type of gas called Brown's Gas. Brown's gas is simply water broken down into its constituent gas parts, hydrogen and oxygen. When these two gases are combined at a certain pressure and lighted, it creates an implosion of tremendous of heat and energy.
California inventor and Professor Yul Brown has developed a system (and has since patented it) that will convert plain tap water to a stoichiometric mixture of hydrogen and oxygen, another state of water besides ice, water, or steam, and he has aptly called it as Brown's Gas.
According to the professor, Brown's gas can be used for many things. It can be used for desalinating water, welding metals together, creating a vacuum to pump up water, sublimate hard metals such as tungsten, and cut through thick steel.
Brown's gas is efficient, safe, clean and inexpensive. Already there are some Brown's Gas Welders available, based on his designs. Though these early models are from perfected and currently cost more than regular welders, the long-term savings from their use offset the cost of acquisition. This means welders no longer need dangerous oxy-acetylene tanks. Water and electricity and Professor Brown's system will suffice.
Another, far more significant use, of Brown's gas is in the area of automotive fuel efficiency.
Brown's Gas is a critical component of a newly introduced system that significantly reduces gas consumption in motor vehicles, Hydro Assist Fuel Cell or HAFC.
HAFC technology's effectiveness is based on its ability to extract a hydrogen-oxygen mixture - yes, the aforementioned Brown's gas - from water by ionization using the car's electricity generated from the motor. The Brown's gas is then added to the fuel before it is burned in the engine. This adds explosiveness to the mixture making the fuel burn more easily and more powerfully.
The Brown's gas extracted from water in the HAFC enriches the gasoline fuel mixture. Enriched fuel gives the same if not greater amount of burn with less fuel thus improving you vehicles gas mileage.
Some studies have shown that the HAFC system can improve gas mileage in internal combustion engines a minimum of 50%. This is a dramatic increase in mileage and fuel economy, though it is expected that savings will vary from vehicle to vehicle, and depending on the uses the vehicles sees. The great thing about HAFC System is that it will work on all existing gasoline-burning cars. It is also compatible with other emerging technologies such as Pre Ignition Catalytic Converter technology or PICC, which should be available to you soon.
These are currently some of the promising uses for Brown's Gas, and as shown by the Brown's Gas Welding machines and HAFC technology in cars, it is a discovery that will greatly benefit many industries particularly the construction and the auto industry. One thing is for certain, once the use of HAFC goes mainstream, it will greatly lessen America's reliance on foreign oil - one of the great victories for Brown's Gas.
About the Author:
Sinclair Sonny a leading professional internet marketer has come up with his newly improved website http://www.jeffotto.com/affiliates/sr.php?uid=sonnex_1 filled with his brilliant and outstanding strategies which help drivers to fulfill each and every goal. Check out his Hydro Assist Fuel Cell website for more information.
Posts
No comments:
Post a Comment