Let's face it; the grout in between the tiles receives very little everyday attention. Despite the potential dangers that I have described in previous articles, the space they occupy is just so small. Many brave it and put it off for a day or two, until the time comes when it becomes so impossibly dirty, total regrouting is required.
How is the process of regrouting done? What materials, equipment, and tools are needed? I will assume that you are the handyman type and are planning to do it yourself, so this article will answer these questions.
The first thing you need to do before planning to regrout is to make sure you do need to replace the existing ones. Discoloration may be apparent in a few of the grout, but that doesn't mean they're beyond hope. Surf around the internet for a few tips to clean dirty grout; there are quite a few of these online, and as I remember, I blogged about this same topic before.
In general, black is a bad thing when it comes to grout. If the bathroom grout is hopelessly infested with black mold, or if pool grout has black algae, then those are very difficult to remove, and regrouting is then to be considered seriously.
Removing the grout involves a tool called a grout saw. This'll do the trick for most kitchen projects, but for bigger areas like pools, a power tool with a diamond blade should be used to cut through it. Then, with a grout scraper, slowly chisel off what's left of the grout. Using a vinegar solution with water, clean the area and finally, vacuum the remaining grout pieces.
You will then apply the new grout. In general, simply follow the instructions included with the grout itself, and you'll be fine. Just remember to mop up the loosened grout that splotched onto the tiles with a damp cloth. Voila! You have regrouted your tiles.
How is the process of regrouting done? What materials, equipment, and tools are needed? I will assume that you are the handyman type and are planning to do it yourself, so this article will answer these questions.
The first thing you need to do before planning to regrout is to make sure you do need to replace the existing ones. Discoloration may be apparent in a few of the grout, but that doesn't mean they're beyond hope. Surf around the internet for a few tips to clean dirty grout; there are quite a few of these online, and as I remember, I blogged about this same topic before.
In general, black is a bad thing when it comes to grout. If the bathroom grout is hopelessly infested with black mold, or if pool grout has black algae, then those are very difficult to remove, and regrouting is then to be considered seriously.
Removing the grout involves a tool called a grout saw. This'll do the trick for most kitchen projects, but for bigger areas like pools, a power tool with a diamond blade should be used to cut through it. Then, with a grout scraper, slowly chisel off what's left of the grout. Using a vinegar solution with water, clean the area and finally, vacuum the remaining grout pieces.
You will then apply the new grout. In general, simply follow the instructions included with the grout itself, and you'll be fine. Just remember to mop up the loosened grout that splotched onto the tiles with a damp cloth. Voila! You have regrouted your tiles.
About the Author:
Sam Weyland prefers to do grout cleaning herself, but also recommends Grout Cleaning for those who want only the best results. Visit Grout Cleaning and clean that grout!
Posts
No comments:
Post a Comment